I bought these to glue on the back of resin and they work like a charm! I have slept in a hoodie with one of these on and woke up with the pin still on!!!
After getting resin pins made and seeing how few came back in what I would deem 'perfect' condition, I looked into alternatives. I decided on resin, but then I needed a secure backing for less pin loss. Gave these a try and 10/10 would recommend.
I do want to point out that I push the backing past the 'click'...I demonstrate the difference in the attached photo.
These have worked great for my lapel pin flowers I'm making as gifts. So far, so good on them holding up. The metal backs are smaller than I expected but they still work well. The rubber backings are great. They are snug and hold the pin very well. Very pleased so far with these little backings. I hope they will hold up over time and repeated use.
These pins are just what is advertised. I used them to mark progress in a game skill card (so not what they intended) but the only downside I'd see to using them for their intended purpose is that they are murder to get off the pins. Now this probably means you won't have them fall off and that is good, but it also means getting them off yourself might take a pliers.
These arrived exactly how I expected. They are the perfect size for super gluing. I have been using them to make decorative plastic pins. I have tons of extra so far, but I love that I got so much of them. They will last a while and don’t bend too easily, so the quality is good. I like these backings a lot.
Yep, the description is accurate, and they do what they're supposed to do. While I wouldn't use them to hold anything of value, they'll suffice for lightweight lapel badges and jewelry.
Feature Product
- Pins size: 10 mm in diameter, 9 mm in length; Material: PVC rubber and nickel plated brass; Rubber pin keeper size: 12 mm in diameter, 7 mm in height
- Practical shape: protruding half round shape handle on the pin back is designed for easy grasp, thus you can be convenient to take on
- Tight rubber pin back: the PVC pin back is tight and they are not easy to fall off; Each pin back has a hole which is compatible with the tie tack pin
- Multiple purpose: good for jewelry making; You also can use the tie back to fix object, such as photos, fabrics, cloth, map, scrapbook, etc.
- Replacement for the lost pin back: can be the pin clutch backs, fits for all lapel pins, tie tacks, citation bars, service bars and jewelry
Description
Well-made rubber pin back
The black pin backs can stay secure on the pin's shaft and does not slide off easily. These rubber pin backs are preferred due to its easier gripping and durability.
Stainless steel pin
This is a good metal tie tack to replace your missing pins. The tie tacks blank pin is peaked, they can go through paper, cloth, fabric easily. Don't apply them to some hard surface to avoid bending and snapping.
Universal pin usage
The pin back is made of rubber, stiff but not soft. These rubber pin backs are essential for anyone wearing badges and name tags on a daily basis. With these pin back set, you are not need to worry about your pin back slipping out, falling off and getting stuck somewhere.
Specification:
Pins size: 10 mm in diameter; 9 mm in length
Pin backs size: 12 mm in diameter, 7 mm in height
Package includes:
50 x Rubber pin backs
50 x Blank pins
These are exactly as ordered. We have only used about 10 so far and the 'fail ratio' has been 1:10. A little more "plastic" feeling than I wanted. I was looking for a "rubber" texture but they are fine for now.
The PVS backings are flush to the tacks when put together, and seem secure. Using them outdoors but not sure if they're weatherproof - will update if any issues (i.e. rust).
The rubber backing is pliable yet sturdy, easy to grip. Metal pin shafts a nice quality silver finish. I wish they had a "tooth" on the pin part (like some other designs) to prevent the spin from spinning when it is attached to the clothing/bag, but otherwise, these are exactly as advertised & I'll re-buy!
I’m making pins to put on my lanyard. Just super clue small things to it and it makes a pin.
WORKED WONDERFULLY FOR THE BOUTONNIERES THAT I MADE FOR MY HUSBAND AND SON.
0 comments:
Post a Comment