Feature Product
- Usable in cone holders or kiln sitters
- Most accurate way to control ceramic firing
- Consistent results
- Orton has been manufacturing since 1896
- Please note that the cones can come in pairs that need to be split apart. The box will come in 25 sets that when split apart is 50 cones. This is done by the manufacturer to reduce the number of cones broken during shipping.
Description
These small Pyrometric Cones are used on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the firing. These Orton cones are made from carefully controlled compositions so that they bend in a repeatable manner over a very small temperature range. When used in a cone holder the cone tip reaches a point level with the base indicating it is properly fired. The cones can also be used in a kiln sitter with equally accurate results. Cones have been used in ceramic firings for more than 100 years and Orton has the history and experience to provide the very best product. This offer includes one box of 50 cones. The number of this cone is 020 which bends at an approximate temperature of 1231 degrees Fahrenheit depending on firing conditions.
0 comments:
Post a Comment