Feature Product
- Height: approx.10-16.5cm(3.94-6.50inch)
- Compatible With: fit for Dia. 50-80mm Laser Tube
- Using special plastic, the material is not aging, the laser tube can be fixed firmly, and the optical path is not easy to be biased
- Adjustable diameter, suitable for 50-80cm diameter laser tube
- Liftable spiral, easy to adjust height
Description
Specifications
Condition: 100% new
Color:Grey & Black
Material: ABS Plastic & Rubber & Metal
Size: approx.11.7x6.7cm(4.61x2.64inch)(LxW)
Height: approx.10-16.5cm(3.94-6.50inch)
Item included: 1 x CO2 Laser Tube Holder
Compatible With: fit for Dia. 50-80mm Laser Tube
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Feature:
1) Using special plastic, the material is not aging, the laser tube can be fixed firmly, and the optical path is not easy to be biased.
2) Adjustable diameter, suitable for 50-80mm diameter laser tube
3) Liftable spiral, easy to adjust height
4) Easy installation
Usage:
1) At the bottom of the tube support (four oblong holes), install four screws, fixed the holder on a flat surface
2) Put the laser tube, adjust the height of tube holder to make the height of the laser tube appropriate, and make it and the reflector mirror (which near to light outlet of laser tube )at about 45 degrees
3) Fastening all screws of tube holder
0 comments:
Post a Comment