The first set of these, I did not know how to get the casting out once it cured and ended up cutting my castings out, destroying the molds.
I ordered a second replacement set, as they do make some very lovely pendents, and then I had the idea of soapy water and forcing soapy water inside with a dull point glue syringe. It will break the seal of the casting from the mold without damaging the casting and the castings will then pop right out when they harden.
These really do make beautiful pieces, but if you try to remove your casting while it is dry, you will run into issues. Use soapy water to get them out and you will get lots of castings out of these molds. They really are nice to work with.
The y’all molds are really hard to get the resin out of. Other than that, I don’t have many problems.
I cannot believe I waited so long to review this product! I got it awhile back ago because I'm starting to make my own orgonite, and these were the best starter kit ever! All of the molds are in perfect condition, and even if the fiberglass resin gets stuck, it is very simple to remove. Bonus, the molds don't rip or tear, and appear to be quite durable. Will buy from this company again, I only hope to be able to try more of their products!
It's a bit tricky to release the molds, but a small amount of dish soap frees them easily.
These molds are wonderful! I've had no issues domolding the castings. Just take a small knitting needle (I think I used a size 1) and slip it in along the side and add a little soapy water then pinch the bottom and they come out pretty easy.
Feature Product
- Moulds of different shapes: this set of pendant moulds has 15 different shapes, such as round, rectangle, oval, triangular, square, teardrop, cylinder and so on, meeting your various needs
- Eye screw dimension: this set of eye screws is approx. 10 mm in total length and the hoop part is 4 mm in diameter, common size for general using
- Easy for using: when you release the item out of the mold, just twist the mold, the piece can be easily push out, after using, easy to wash and clean with soap and water, and please put them away from dust after washing
- Wide range of usage: suitable for craft projects making and jewellery DIY, make pendants, earrings or other jewelry items, you can also add some flowers, glitter, colors to make your own crafts
- Quantity: the package includes 15 pieces of pendant mould, made of silicone, and 100 pieces of screw eye pins, made of metal alloy, quality and durable, allow you to use for a long time
Description
TecUnite 15 pieces resin molds silicone pendant mould for jewellery DIY and 100 pieces eye screw
Easy for using:
When you release the item out of the mold, just twist the mold, the piece can be easily push out, after using, easy to wash and clean with soap and water, and please put them away from dust after washing.
Wide range of usage:
These moulds and eye screws are suitable for craft projects making and jewellery DIY, make pendants, earrings or other jewelry items, you can also add some flowers, glitter, colors to make your own crafts.
Specifications:
Pendant moulds:
Shapes: 15 shapes
Material: silicone
Color: semi-transparent
Quantity: 15 pieces
Eye screws:
Total length: 1 cm
Hoop diameter: 4 mm
Material: metal alloy
Color: silvery
Quantity: 100 pieces
Package includes:
15 x Pendant moulds
100 x Eye screws
Note:
Including small items, please keep them away from children under 3 years old.
Makes a nice crystal but VERY HARD to get out of the mold, even with using mold release. Update: Customer Service was excellent and immediate to resolve the issue, and replaced the items for no cost to me. I see from another reviewer that using dish soap helps release the resin from the mold. I will try that next time.
Pendants hold 13mL of fluid. Very good construction.
These are perfect!
These were excellent. I like that the flat ones have the hole post in them already and I loved that I could get 10 different types of the long ones. I found something like this elsewhere and they charged the same price for only 3 molds so this was a great deal. The tube molds are a little hard to get resin released from, but with some patience and soap they eventually pop out.
I used a couple of tube-shaped ones and all the 5 molds in a top row, and I really like all of them! For the tube-shaped ones, I held eye pins on top while I insert under the UV light. The ones with holes are very nice, too since I can just add the jump rings after they are cured.
0 comments:
Post a Comment