It’s easy to see why this is one of the old standards for silver electroplating. It truly is ready to use as it comes in the bottle. If you have a piece of jewelry that needs replating, all you need is this, a silver or stainless steel anode, a regulated power supply, and a glass or plastic container of some kind. So long as the piece is clean and oil-free, it’s easy to get good results.
Feature Product
- .- Size: 1 Qt / 0.946 l
- .- Use PURE SILVER or STAINLESS STEEL ANODE.
- .- Made in USA
Description
PRODUCT DESCRIPTION
KROHN READY-TO-USE SILVER ELECTROPLATING SOLUTION is a cyanide type plating bath which imparts a bright silver plate. Articles to be plated must be cleaned before plating. Extra care is necessary to insure the removal of all polishing rouge, oil, grease, finger prints, etc. For best results, the pieces to be plated should be cleaned at 5-6 volts in a KROHN TIVACLEAN solution (8 Oz per Gallon of water heated to 160 - 180 F) Fallowed by a cold water rinse. Solution 1 Qt (946 ml).Use watt caution.
PRODUCT SPECIFICATIONS
.- Size: 1 Qt / 0.946 l
.- Use PURE SILVER or STAINLESS STEEL ANODE.
.- Made in USA
0 comments:
Post a Comment