These i used them for my disney lins since one that usually come with the pins are rubber backs and fall off sometimes, these go on perfectley snap on and even if you try to pull the off there no going anywhere greqt job with ther pin backs, they do have q bit of play to them because they sit at the verry top but i think of it as a posotive incase they get caught on something they have a bit of slack to them.
I needed these for my Pins and I must have throw away all my Butterflies because I couldn't find not one. So I made the decision too order all brand New one for Military insignia Pin that I have on my Under Armour Black Ball Cap.
Nice color & material. I like the case. It fits my pins perfectly
yep they work
They sometimes come unclasped, but good product.
Feature Product
- Material: the small butterfly clutch is made of quality nickel plated brass; Unnoticeable while lock pins firmly and keep them secure; Metal material makes it anti-wear, sturdy
- Package contents: each butterfly clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage; Quantity are enough for replacement to your torn or lost one
- Exquisite design: butterfly clutch pin backs are great match for most metal pin; Metal butterfly clutch provides good grip of pin to keep it stay in place; With its firm and protective grip, rest assured that you will never lose another pin again
- Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off; Simply push to secure onto pin post and pull the trigger while holding onto your pin to release; These locking pin backs are a great alternative to butterfly and rubber clutches
- Wide usage: the butterfly metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins; Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc.
Description
Feature:
Size:
Each butterfly clutches pin size is approximately 10 mm/ 0.4 inch in diameter, packaged in clear plastic case for neat storage; Small box sizes is approx. 9.5 x 6 x 1.5 cm/ 3.8 x 2.4 x 0.6 inch, big box sizes is approx. 10.5 x 7 x 2 cm/ 4.1 x 2.8 x 0.8 inch.
Easy to apply:
No tools required, no set screws to loosen, simply push to latch on; Squeeze - pull the small flange on the back and loosen it from the pin post to keep your object in proper position for important moments.
Provide protection:
Whether you need to fashionably secure a cute brooch onto your dress or a don lapel pin, these locking pin keepers offer good protection for your pins and keep them safe and secure.
Specifications:
Material: quality nickel plated brass
Size: 10 mm in diameter
Package including:
50 x Pin backs replacement
1 x Metal box
Warm notice:
Small parts, please keep away from children to avoid choking.
Prefect
Handy
I wear alot of pins and the backs always fall off. I got these backers and haven't had a problem since.
I couldn't get them off without using pliers! I'm not complaining though :)
I used these for my ita bag and once in a while the backs would pop off because i stuck the pins through cardboard, wish they would stay on better in that regard.
0 comments:
Post a Comment