It’s easy to clean, the pyramids apex comes out sharp, the edges are crisp, and the pyramids mold is easy to align which the stand. Go for it.
I was a tad skeptical of this mold upon opening box merely due to size and shape but I am pleased to say that this mold is phenomenal; it comes with a stand that helps support the shape and have had no visible issues thus far. It is a rather large mold so work slowly in small sections in order to get the effect your looking for bubble free.
I enjoyed using this mold. Does retain heat when poured all at once, could make your clear resin cloudy. I would recommend layers. Colored layers would work perfectly. If using resin, resist the urge to pull off the silicone side wall before pouring another layer.
Edges are sharp, minor sanding needed.
I purchased 2 of these pyramids. Used both once, no problem. Used them second time and both molds stuck to my resin project. Both were ruined due to the silicone melting and sticking to 3 sides of the pyramid, in the same spot! Can not get off the melted silicone. Very disappointed because I wasted resin and gemstones in the resin. I see i am not onlying one this happened to. Seller.... i followed instructions and added mold release. I think these molds are not heat resistant and that they degrade after first use. I also think that leaving resin in mold for less time might work better as the resin is not fully hardened. Have used other molds and have had no problem. Well that was a waste of 40 + dollars. Wish this seller would have warning. Everal weeks later....I sanded down the pieces and re-resined them. They look great. Now for apologies. ... to the seller.... they refunded me the purchase price which shows me they are well intentioned sellers. I found out that the mold release was the issue. Not the molds themselves. I am truly sorry for jumping to conclusion. I ask that all readers learn from my mistake and embarrassment.
Feature Product
- PYRAMID MOLDS KIT: This pyramid mold kit includes 2 pcs silicone inner molds and 1 pcs plastic frame. Pyramid mold size: Height:15cm/5.9inch; Base:15cm/5.9inch x 15cm/5.9inch.
- LARGE RESIN MOLDS: To fill the entire resin mold, you may need about 1200g/42pz of resin. If you plan to make a huge pyramid, mold release is recommended to use and do divide your casting process into several times.
- ORGONE PYRAMID MOLDS: This large pyramid mold is with measurement in the outside. you can make any size orgone pyramid smaller than 15cm, such as 4cm, 6cm, 10cm etc
- DURABLE SILICONE MATERIAL: Our large resin molds are made of durable silicone material, very flexible and easy to de-mold. The finished projects are with high transparency appearance.
- NOTE: Be careful to place the silicone mold insert into the plastic frame accurately, make sure all sides flush. The silicone molds are for craft use only, not suitable for food. If there's any issue with the product, please feel free to contact us. We will try our best to help you solve the issue.
Description
Product Description:
Note:
How to clean: Please clean the silicone molds with rubbing alcohol, and use the soft cloth to wipe clean.
How to store: Please store the resin molds away from direct sunlight and dust.
How to release: It is recommended to use "mold release". If you don't have, you may use a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom. Note: Please make sure your resin pyramid is fully cured.
Why is this pyramid mold special ?
- Hard plastic box stand included; stands firm and strong on the flat surface to ensure a perfectly square based orgone pyramid
- The internal silicone mold sits perfectly inside the stand. Without the stand, you will find it very hard to make perfect pyramid as the internal silicone mold might tilt to one side as you add the resins and crystals.
- Scales engraved on the box stand that you can ensure your pyramids are the size you like.
Material: silicone
Color: transparent
Pyramid Mold Size: height: 15cm/5.9inch ; base: 15cm/5.9inch x 15cm/5.9inch
Package included:
2pcs x Silicone Pyramid Molds
1pc x Plastic Frame
Just made my first orgone pyramid EVER. It looks amazing! I warmed up the room at 80 degrees and kept it there for 24hrs. Made sure my measurements were as precise when mixing the resin to .1 grams. I used soap, slowly removing the pyramid from the mold, and adding soap there. The pyramid slipped right out. It was AMAZING!
This is a great set that allows you to be very creative. I live that you control how large you want your piece to be by how much epoxy you use rather than need half a dozen different sized molds.
The molds came quick due to prime, and as soon as I unboxed them I was excited! I currently have two small pyramids made, and it came out great! I noticed it did stick a bit more at the bottom, but the second one I made I used a bit of baby oil on the sides and that one didn’t stick at all.
These a really great molds!
The product was nice but the silicone was not thick and sturdy enough, and the mold started ripping after the first use!
I like this mold, very easy to unmold.
0 comments:
Post a Comment