Packaged well. This set is good for checking the sizing on rings and is also good for resizing slightly.
Used a few times worked great I bent a gold ring out of round instead of taking it to jewelry fixed it myself another
ring was a little tight stretched it out on the mandrel just a little the ring fits more comfartble
R--J--
The included hammer is not hard enough to size 14k gold. I had to use a small ballpene hammer. The mandrel and sizes are very nice, and did not scratch the engagement ring I got for my lady.
Very pleased with quality of this set.
The gauges are accurate and the quality is good.
Feature Product
- Package Include: 1 x Wire Cutting Plier; 1x Flat Nose Plier; 1 x Round Nose Plier; 27 x Circle Models; 3 x Ring Mandrel Sizer Stick; 1 x Wooden Ring Clamp; 1 x Rule; 1 x Rubber Jewelers Hammer, 1x Awl; 1 x Tweezers; 1 x Anvil.
- Ring Sizer Mandrel: the metal ring stick measure tool with US sizes of 1-15 and European sizes of 41-76. Easy to read size chart on mandrel for full and half sizes, with line marks on shaft to get the ring straight before measuring.
- Circle Models: 27pcs ring sizer or finger gauge made of alloy metal, measures the size of your fingers for making rings. Fine workmanship With round outside and flat inside, smooth edges do not hurt your hands. Perfect for measuring wedding rings, class rings and other wide rings.
- Easy to Use: use this two sides rubber hammer to making rings on measuring stick , it can be used to flatten or strengthen ring with leaving minimal hammered texture, convenient for jewerly making.
- 13 Sets Jewelry Sizer Tool: perfect for fitting wedding rings, class rings and other wide rings. With this finger gauge you will never have to look for a gauge again, which will save you a lot of time and work.
Description
Size:
Wire Cutting Plier: about 106mm long, 97mm wide, 10mm thick.
Flat Nose Plier: about 130mm long, 70mm wide, 10mm thick.
Round Nose Plier: about 122mm long, 75mm wide, 10mm thick.
Wooden Ring Mandrel Sizer Stick: abou 2.95"(75mm) in diameter, 11.42"(290mm) long.
Circle Models: US sizes of 1-15 and European sizes of 41-76.
Wooden Ring Clamp: about 140mm long, 43mm wide, 39mm thick.
Wooden Ring Mandrel Sizer: about 0.47"~0.98"(12~25mm) in diameter, 11.02"(280mm) long.
Rulers: about 170mm long, 19mm wide, 0.5mm thick.
Rubber Jewelers Hammer: about 2.68"(68mm) wide, 10.16"(258mm) long, 0.98"(25mm) thick.
Awls: about 120mm long, 16mm wide; pin: 0.55~9.2mm.
Tweezers: about 135mm long, 10mm wide, 4mm thick.
Anvil: about 63mm long, 63mm wide, 15mm thick.
Ring Mandrel Sizer: abou 0.98"(25mm) in diameter, 9.84"(250mm) long.
Feature:
Circle Models: 27pcs ring sizer or finger gauge are fine workmanship and high quality, measures the size of your fingers for making rings.
Wooden Ring Clamp: the wooden wedge can be driven into either end, after the ring is place in the jaws, to tighten the clamp and hold it securely. Perfect for holding rings and other small items while you file, polish, or do other work on them.
Easy to Use: easy to read size chart on mandrel for full and half sizes, with line marks on shaft to get the ring straight before measuring. Come with a flexible cable with a screw connection which can be opened easily.
How to Use:
Step 1: Put your finger into the 27pcs ring sizer set, choose a suitable size, then measure the size with the ring sizer mandrel.
Step 2: Easy to read size chart on mandrel for full and half sizes, with line marks on shaft to get the ring straight before measuring.
Step 3: Measure the finger size of your girlfriend or wife,prepare a ring for them as a suprise, enhance your relationship!
Works great. The sizing stick and ring sizers match up, and the stick matches my rings that I know the size. The mandle works well, as does the mallet.
Works well.
worked great
Good quality. Have made several coin rings. Can't beat the price.
Good
0 comments:
Post a Comment